Research

Micromagnetism, spin waves, skyrmions, DFT, 2D materials, nanofluids and renewable energy through numerical simulation.

New Photovoltaic Materials and Solar Cells

The transition towards a truly sustainable energy model requires the development of more efficient and environmentally friendly solar panels. In this research line, we focus on advanced modeling of emerging photovoltaic materials, highlighting the study of kesterite-type alloys (such as Cu₂ZnGe(S,Se)₄ and Cu₂NiGeS₄). These structures are a promising technological alternative, since they do without heavy or highly toxic elements and are based on compounds that are abundant in nature. To achieve this tailored design without resorting to the costly trial and error of the traditional laboratory, we structure our methodology at two major analytical scales:

A. Atomic-Level Engineering: The Quantum Approach

The starting point lies at the most fundamental scale, using ab initio calculations based on Density Functional Theory (DFT). At this level, we apply strain engineering techniques, computationally simulating how a minute compression or expansion of the crystal lattice alters the internal behavior of the material.

This structural tuning allows us to evaluate and optimize three key microscopic factors:

  • The band structure: The energy pathways that determine whether the material is a good semiconductor.
  • The density of states (DOS): The number of “seats” or energy levels available to electrons.
  • The fundamental optical properties: Precisely determining the material's ability to absorb, reflect and refract sunlight.

B. Device Simulation: The Macroscopic Leap

Knowing that a material is optically perfect at the atomic level is only the first step. To assess its real viability, we extract the quantum parameters calculated with DFT and integrate them into specialized macroscopic simulation tools, such as the SCAPS-1D software.

This theoretical coupling allows us to model the behavior of the complete solar panel under real illumination conditions, predicting metrics that are critical for industry:

  • Current Density-Voltage (J-V) Curves: The profile that shows the actual electrical power the device can deliver.
  • Quantum Conversion Efficiency: The exact percentage of light particles (photons) that the material successfully converts into electricity.
  • Fill Factor: A key indicator of electrical quality, which assesses how close the solar cell operates to its ideal theoretical performance.

In short, this line integrates quantum mechanics and semiconductor physics to accelerate the design of a new generation of solar cells: devices with very high electrical performance, ready to scale industrially and strictly respectful of the ecosystem.

Recent publications

  • Analysis of electronic and optical properties for photovoltaic applications. (Journal of Physics D: Applied Physics). DOI: 10.1088/1361-6463/ad3b2a
  • Strain Effects on the Electronic and Optical Properties of Kesterite Cu2ZnGeX4 (X = S, Se): First-Principles Study. (Nanomaterials). DOI: 10.3390/nano13121852
  • Modeling of highly efficient CNGS based kesterite solar cell: A DFT study along with SCAPS-1D analysis. (Solar Energy). DOI: 10.1016/j.solener.2023.111929
See all publications

Energy Efficiency, Heat Transfer and Neural Networks

To create tomorrow's energy technology, traditional mathematics is no longer enough; we need the power of Artificial Intelligence. In this research area, we merge the unbreakable laws of classical physics (the equations that guarantee the conservation of mass, momentum and energy) with advanced Machine Learning algorithms to achieve a key goal: optimization.

First, we study the behavior of “next-generation fluids”. We analyze how very complex mixtures flow and deform (their rheology), such as hybrid and ternary nanofluids or viscoelastic fluids (Jeffrey models). We virtually subject these liquids to extreme scenarios: heating by electric currents (Joule heating), abrupt changes in viscosity and “transpiration”, or mass transfer through porous surfaces.

Because the physics behind these phenomena is extremely complex and nonlinear, we take a technological leap and delegate part of the analysis to Artificial Neural Networks (ANN). Using highly efficient training schemes (such as the Levenberg-Marquardt backpropagation algorithm), we “teach” our models to find order within the chaos of fluids.

The use of these neural networks is not a mere computational exercise; it allows us to predict and optimize variables that are critical for the energy industry:

  • Predicting the flow of energy and matter: We calculate with very high precision how the fluid will transfer heat (Nusselt numbers) and mass (Sherwood numbers), which makes it possible to design systems without costly trial-and-error testing.
  • Fighting energy waste: We identify the exact conditions that minimize the entropy generation rate. In practical physics, this means preventing useful energy from degrading and being lost during the process.
  • Boosting renewable energy: We apply all these predictions directly to the design of solar thermal collectors and heat dissipation systems, ensuring that every drop of fluid harnesses the sun's energy with the greatest possible efficiency.

Recent publications

  • Joule Heating and Viscosity-Ratio Effects on Dissipative Ternary Nanofluid Flow over a Permeable Surface. (International Journal of Computational Methods). DOI: 10.56578/ijcmem140104
  • Artificial neural network analysis of Jeffrey hybrid nanofluid with gyrotactic microorganisms for optimizing solar thermal collector efficiency. (Scientific Reports). DOI: 10.1038/s41598-025-88877-6
  • Computational and artificial neural network study on ternary nanofluid flow with heat and mass transfer with magnetohydrodynamics and mass transpiration. (Neural Computing and Applications). DOI: 10.1007/s00521-024-10325-9
See all publications

Magnetohydrodynamics and Nanofluids

The motion of liquids may seem unpredictable, but at the frontier of fluid physics we have learned to describe it with precision. In this research line, we study the hydrodynamics of complex fluids —both the predictable ones (Newtonian) and those with “rebellious” behaviors that change their viscosity (non-Newtonian)— when they are simultaneously subjected to electromagnetic forces and temperature differences (mixed convection).

To understand this dynamic microscopic world, we use powerful computational simulations to solve the celebrated Navier-Stokes equations. However, we do not do so with ordinary liquids, but with highly sophisticated fluids: we model nanofluids enriched with mixtures of three types of nanoparticles (ternary suspensions) which, in addition, are inhabited by gyrotactic microorganisms (tiny biological swimmers that intelligently orient themselves against gravity).

We put these exotic mixtures to the test by making them navigate custom-designed “obstacle courses” (complex boundary scenarios), evaluating how they flow through:

  • Riga plates: Surfaces that act as electromagnetic propellers, pushing the liquid without the need for moving mechanical parts.
  • Biomimetic channels: Vertical tubes lined with “cilia” (similar to the villi in our body) where the fluid is driven by electric fields (electroosmotic regime).
  • Elastic and thermal media: Environments where we analyze how heat radiation affects thick fluids that stretch like plastic (viscoelastic media).

All this enormous numerical and analytical effort has a fundamental goal: to map as accurately as possible how fast the fluid will move, where heat will concentrate and in which zones microbes will cluster. By understanding this behavior, we can assess how efficient the process is from an energy standpoint. These findings are the key piece for designing and refining microfluidic devices (entire medical laboratories compressed onto a chip) and high-efficiency bioreactors for the biotechnology and environmental industries.

Recent publications

  • An analysis of heat and mass transfer of ternary nanofluid flow over a Riga plate: Newtonian heating. (Numerical Heat Transfer, Part B: Fundamentals). DOI: 10.1080/10407790.2023.2282165
  • Electroosmotic MHD ternary hybrid Jeffery nanofluid flow through a ciliated vertical channel with gyrotactic microorganisms: Entropy generation optimization. (Heliyon). DOI: 10.1016/j.heliyon.2024.e25102
  • Insights into significance of radiative inclined MHD on mixed convective viscoelastic flow of hybrid nanofluid over a permeable surface with mass transpiration. (Journal of Engineering Thermophysics). DOI: 10.1134/S1810232824040179
See all publications